The My Passport for Mac drive's built-in 256-bit AES hardware encryption with WD Security software helps keep your content private and safe. Just activate password protection and set your own personalized password. Getting Started with a My Passport for Mac How to format a WD hard drive to exFAT or FAT32 file system. Answer ID 291. This answer explains how to setup and use WD Security and WD Drive Utilities on a Windows or Mac computer. How to install WD Security & WD Drive Utilities. WD Passport Shows Up on my Mac but not on Windows t0pher Apr 2, 2014, 5:32 PM I just built a new PC and my WD 1TB Passport external hard drive shows up fine on my Mac laptop but won't appear on. Western Digital's Passport external drive for Mac isn't eternally bound to macOS. By formatting the Passport as an exFAT or FAT32 drive, you can use it with Windows computers, too.

In order to use the same drive on both the platforms, you need to format or reformat it using exFAT or FAT32 (DOS) format. You have not take Backup before Formaating?

What do I mean by that? • For copy or pasting files of specific types of e.g. Music or Photos • Transfer files from one Mac to another, perhaps taking your My Passport to another location • as a Backup destination for Time Machine • Share files between a Mac and a PC You can have your Passport drive specific to one thing. Say backups or split up or partitioned for several roles. How do I Start to use WD My Passport for Mac?

There are a few parts to this question and answers. Firstly because the drive is connected to your Mac via a physical cable, a USB cable. The My Passport drive can only be connected onto one Mac at a time.

It may only take a few seconds or a minute or two depending on the hard drive size. • Once done dismiss the Disk Utility Screen.

It has happened to users. Mac OS will always recognize its own encryption and password methods. You can encrypt your data and set a password by selecting Mac OS Extended (Journaled, Encrypted) file system. Time Machine Auto Backup Check Time Machine auto backup is selected off.

I have a X99 board with same drive and Windows 10 as said no issues do not think it's an incompatibility with Windows 10, maybe a bad drive, missing, outdated, corrupt or conflicting drivers. Also try a different USB 3.0 Cable even though you sate you feel it is good and all other USB 3.0 ports.

To start formatting, connect your WD Passport to your Mac; then open “Mac HD” and click “Applications,” “Utilities” and “Disk Utility.” From the Disk Utility window, select the Passport hard drive. Here, you’ll usually see two listings of partitions available on the drive – select the listing that is furthest left. Click the Disk Utility’s “Erase” button; assign the drive a name in the “Name” field; then hit “Erase,” and click “Done” when the erasing process is complete. Now, click the “Partition” button at the top of the Disk Utility and click “Format.” Choose “exFAT” from the drop-down menu that appears and click “Apply” to format the drive, which will take a few minutes. Once the formatting is complete and you get a message that says “Operation successful,” click “Done.” To Windows 8 and Earlier The external drive for Mac to Windows 8 transition makes use of Window’s built-in Disk Management software rather than the macOS Disk Utility, but you’ll still want to format your WD Passport as an exFAT drive. To do so, connect the Passport to your PC, enter the Windows 8 Start menu and choose “Disk Management.” In the Disk Management app, right-click on the drive and select “New Simple Volume.” from the menu that appears.

There are certain situations when photographers need to connect their single external hard drive to multiple operating systems. Most of the times, professional photographers need to do this as they usually store their photo collection in external drive. On the other hand, a particulate type of operating system follows a single file format to store data in an internal or external hard drive. For example, if we talk about Windows users, then the file system should be NTFS, similarly with Mac owners it should be HFS. Usually, both the formats are not compatible with each other, therefore when it comes to external hard drive, the user cannot use one storage drive on both the platforms. But this time, Western digital has introduced a range of portable hard drives named ', which are designed for both Mac and Windows systems.

It comes with all the software you need to help protect all your data, including WD Backup and WD Security software.

Format it correctly. Then tell Time Machine on your Mac to use the drive to back up to.

You’ll see the option at the bottom left corner of the Time Machine screen. If it is the first time you are setting up Time Machine and the check box isn’t already selected. On the next screen check the box to ‘Show Time Machine in menu bar’. You can also check the box to ‘Back Up Automatically’ if you would like your Mac to kick off a backup when your WD My Passport backup drive is connected to your Mac. • You can kick off a Time Machine backup straight away, when your My Passport drive is connected to your Mac, by heading to the top of your desktop and selecting the Time Machine Symbol. Right Click to Eject External Drive Ejecting The WD My Passport hard drive and Ejecting a partition To ensure you do not corrupt the data held on your WD My Passport drive always, always right click on the drive or on all the partition icons to eject the drive partitions before removing the USB Cable. Frequently Asked Questions • If I use Time Machine Do I only have access to the drive from the one Computer?

I run the tool and unlock the drive, but still, the only thing that shows at the Windows Explorer or My computer is the D: unit as being the WD Unlocker. I cannot reach the unit or the files. Have already download the WD Utilities which tested ok for the drive! Could you guys help me out?

What Are Drivers? Drivers are pieces of software that allow the computer itself to interact with a hardware device. Karaoke software for mac 2016. Without drivers, hardware you connect to your computer - i.e.

Check out my resources section below to see the discussion threads.

That one time I can see my HDD on 3.0 port. From, the next time I plug in nada nothing happens and HDD is not detected. PS: I have checked health of HDD via HDtune and other software as well and its perfectly healthy + the cable is all good to go.Yeah i am sorry realized i had that part wrong a Standard Enhanced PCI to USB Host Controller is for USB 2.0. I see from ASUS Site and your Device manager screen capture showing Intel and ASMedia USB 3.0 and 2.0. Intel® Z97 chipset: 4 x USB 3.0/2.0 port(s) (4 at back panel, blue) Intel® Z97 chipset: 8 x USB 2.0/1.1 port(s) (4 at back panel,, 4 at mid-board) ASMedia® USB 3.0 controller: 6 x USB port(s) (2 at back panel, blue, 4 at mid-board) You also stated you usually use ASUS CD since Windows 7 to install drivers but noticed Windows 10 installed all the proper system drivers. I would recheck this part as i looked at ASUS Site and saw Windows 10 drivers and for certain important drivers i would go to the manufacturer. Either compare the driver versions in Device Manager to ones on ASUS site and make sure have all the correct updated drivers.

• What causes driver-related issues? Uninstalling / reinstalling programs, upgrading software or hardware, Windows updates or service pack upgrades, or spyware/virus infections to become corrupt can cause your drivers become outdated.

Launch Disk Utility from Utilities. Select the not mounting WD My Passport for Mac hard drive on the left part of the window. Click the Erase on the top of the Disk Utility window. Complete the related information (name, format, scheme, etc.), then click Erase button.

After successful formatting, you can directly save or move files to it like any other external hard drive. In macOS / OS X Platform • Connect your Western Digital My Passport drive to Mac computer, and let the OS detect and mount the drive for use. Now, a new hard drive icon will appear on the desktop. • On macOS Dock, select Finder. When the Finder window opens, on the menu bar, select ‘Go’ and then ‘Utilities.’ After that, you will be able to see /Applications/Utilities folder in Finder. From the Utilities folder window, select ‘Disk Utility’ application. • When the Disk Utility opens, choose the Western Digital hard drive icon from the sidebar. • Click ‘Erase’ on the Disk Utility file menu.

A video card or a webcam - cannot work properly. What Problems Can Corrupt Drivers Cause?

Thank you Paul-nz, but no, it doesn't show up under Disk Utility. I had a similar problem several months ago with a WD My Book that I was using as my Time Machine backup. It took it several hours to appear on my desktop, but finally did and I was able to copy off my files onto this new WD My Passport, then run Disk Utility on the My Book and now it is working just fine. I bought the My Passport to copy my files from the My Book. So all my work for several years is on this My Passport. Now I can't get the My Passport to mount even when I leave it connected to my computer overnight. I don't know how to access the files on this My Passport so I can back them up and reformat the drive.

This answer explains how to format a drive in the exFAT or FAT32 file system. This allows the drive to be used on both Windows and macOS. This answer explains how to format a WD drive for use on Windows and macOS. This answer explains why My Cloud mobile app is unable to access the 'TimeMachineBackup' or 'SmartWare' shares on a My Cloud device. Foreground watermark word for mac. This article explains how to backup and restore using the File History feature of Windows 10. This answer explains how to fix WD Software install, uninstall and update issues on Windows PC. This answer explains what the SES (SCSI Enclosure Services) driver is on a USB or FireWire drive that includes WD SmartWare. It also explains why the driver is needed, and how to stop Windows from requesting you install it. WD Community It's taken a fall or two to the soft carpet floor from a height of about 16 inches, but I don't think this should be a problem. I'm sorry, but those 16 inches are more than enough to damage a drive. The drive is probably physically damaged. It doesn't take much of a bump to damage them.

• Plug the USB cable for the WD My Passport drive into your Mac. • Double click on the desktop icon for your partition. • You can copy and paste or drag and drop as I have described above to put your files in a partition you have set up for sharing between a Mac and a PC. Want to find out how to between a Mac and a PC? Follow this Link • Eject the drive by right clicking on the drive or partition icon and then you can connect the USB cable into your Windows PC and view and use the files there. Want to use a partition and allocate it to Time Machine for backup? The following section tells you how.